Transmission
Parker 16 cc unitized pumps and motors
Parker 16 cc unitized pumps and motors
Travel Speed Forward
Ground / Transport - 11.5 mph (18.5 kph)
Ground / Transport - 11.5 mph (18.5 kph)
Wheels/Tires
Anti-Scalp Wheels - 13 standard
Anti-Scalp Wheels - 13 standard
Drive Tires
24 x 12 - 12 in. (61 x 30.5 - 30.5 cm)
24 x 12 - 12 in. (61 x 30.5 - 30.5 cm)
Steering Tires
Caster - 13 x 6.5 - 6 in. (33 x 16.5 - 15.2 cm) pneumatic
Caster - 13 x 6.5 - 6 in. (33 x 16.5 - 15.2 cm) pneumatic
Engine Make
Kohler
Kohler
Gross Horsepower
38 hp
The gross horsepower of these diesel engines was laboratory rated at 3600 rpm by the engine manufacturer in accordance with SAE J1940 or SAE J1995. As configured to meet safety, emission and operating requirements, the actual engine horsepower on these mowers will be significantly lower.
38 hp
The gross horsepower of these diesel engines was laboratory rated at 3600 rpm by the engine manufacturer in accordance with SAE J1940 or SAE J1995. As configured to meet safety, emission and operating requirements, the actual engine horsepower on these mowers will be significantly lower.
Air Cleaner
Air Filter - Heavy-duty canister air cleaner air filtration system with electronic vacuum sensor
Air Filter - Heavy-duty canister air cleaner air filtration system with electronic vacuum sensor
Starter
Electric
Electric
Fuel Type
Gasoline
Gasoline
Fuel Capacity
12 gal. (45.5 l / 48 qt.)
12 gal. (45.5 l / 48 qt.)
Length
Box Dimensions - 104.5 in. (265.4 cm)
Box Dimensions - 104.5 in. (265.4 cm)
Width
Box Dimensions - 86.5 in. (219.7 cm)
Box Dimensions - 86.5 in. (219.7 cm)
Height
Box Dimensions - 52.5 in. (133.4 cm)
Box Dimensions - 52.5 in. (133.4 cm)
Mowing Width
96 in. (244 cm)
96 in. (244 cm)
Mowing Height Range
1.0 - 5.5 in. (2.5 - 14.0 cm)
1.0 - 5.5 in. (2.5 - 14.0 cm)
Mowing Height Adjustments
Hydraulic with Rocker switch
Hydraulic with Rocker switch
Steering
Controls - 1-5/8 in. (4.1 cm) diameter grips; adjustable, dampened
Controls - 1-5/8 in. (4.1 cm) diameter grips; adjustable, dampened
Deck Construction
Design - 7 ga. TURBO FORCE® with bull-nose bumper
Design - 7 ga. TURBO FORCE® with bull-nose bumper
Deck Material
7 ga. steel
7 ga. steel
Discharge
Chute - Rear
Chute - Rear
Spindles
Bearings - Maintenance-free
Housing - 9 in. (22.9 cm) diameter cast aluminum
Bearings - Maintenance-free
Housing - 9 in. (22.9 cm) diameter cast aluminum
Blades
4 at 24.5 in. length
4 at 24.5 in. length
Blade Tip Speed
18,100 ft. / min. (5,516 m. / min.)
18,100 ft. / min. (5,516 m. / min.)
Working Area Capacity
Terrain Type - Rough
Terrain Type - Rough
PTO Clutch
Electromagnetic
Electromagnetic